RoofReflex Insulated Breather Membrane 1.4m x 10m 14m2

Product Details

For use in a wide range of building applications, RoofReflex is an insulated, breathable roof and wall underlay that is airtight and vapour permeable. RoofReflex is designed with an insulation layer laminated to a high emissivity surface, to help improve u-values. Install on the “Cold” (exterior) side of a structural frame or directly over insulation or rafters and pair with a vapour barrier on the “Warm” (internal) side - seal with Novia tapes for best results. Supplied in rolls Water resistant to EN 1928 W1 Reduces thermal bridge losses 1.5m wide Meets EN 13859-1 for pitched roofing and EN 13859-2 for walls 1 month UV Resistance 10 Year Warranty Length: 10m Roll Thickness: 730gsm Width: 1.4m Coverage: 14m2 Resistance to Water Penetration: W1 Class Reaction to Fire: E Class What is a Breather Membrane? Breather Membranes are designed to allow wall and roof structures to release excess moisture vapour into the atmosphere - to “breathe” - without allowing wind-driven rain and dust to penetrate wall or roof structures. They must be installed on the exterior (“cold”) side of any structure - beneath the main outer building lining, roof tiles or cladding. It is advised to seal your Breather Membrane with corresponding Lap Tapes for a quality, breathable seal. How do I Apply a Breather Membrane? A breather membrane should be applied on the exterior side of any wall or roofing structure - under the outer building lining, roof tiles or cladding. It should be fixed at intervals with suitable, permanent fixings and finished with Breather Membrane Lap Tape for the most reliable and air-tight finish. It is best used in conjunction with a Vapour Control Layer applied to the interior of the structure. For more information on use and specification, please download the data sheet for this product below. Data Sheets & Information RoofReflex Insulated Breather Membrane Data Sheet