Novia Building Wrap Wall Breather Membrane 2.7m x 100m 270m2

Product Details

This Novia wall breather membrane is an entry-level, lightweight breather membrane for use in wall structures. Install on the “Cold” (exterior) side of a structural frame or directly over insulation and pair with a Vapour barrier on the “Warm” (internal) side - seal with Novia tapes for best results. Supplied unfolded, in rolls Water resistant to EN 13111 Highly vapour permeable 2.7m wide Meets EN 13859-2 (walls) One side eatures overlap guide lines 3 month UV Resistance Length: 100m Roll Width: 2.7m Coverage: 270m2 Resistance to Water Penetration W2 Class Reaction to Fire E Class Low Temperature Stability (no cracking at) -60°C UV Resistance 3 Months What is a Breather Membrane? Breather Membranes are designed to allow wall and roof structures to release excess moisture vapour into the atmosphere - to “breathe” - without allowing wind-driven rain and dust to penetrate wall or roof structures. They must be installed on the exterior (“cold”) side of any structure - beneath the main outer building lining, roof tiles or cladding. It is advised to seal your Breather Membrane with corresponding Lap Tapes for a quality, breathable seal. How do I Apply a Breather Membrane? A breather membrane should be applied on the exterior side of any wall or roofing structure - under the outer building lining, roof tiles or cladding. It should be fixed at intervals with suitable, permanent fixings and finished with Breather Membrane Lap Tape for the most reliable and air-tight finish. It is best used in conjunction with a Vapour Control Layer applied to the interior of the structure. For more information on use and specification, please download the data sheet for this product below. Data Sheets & Information Novia 2.7m Building Wrap Breather Membrane Data Sheet