Novia Reflex - Reflective Roof & Wall Breather 1.5m x 50m 75m2

Novia Reflex – Reflective Roof & Wall Breather 1.5m x 50m 75m2

Improve the R and u-value when used in suitable constructions with the Novia Reflex Reflective Roof & Wall Breather Membrane for use in pitched cold and warm roofs and insulated walls. A metallised polypropylene material allows this Roof and Wall Breather to help improve insulation performance in addition. Install directly over insulation, boarded roofs or rafters, or on the “Cold” (exterior) side of a structural frame or roof and pair with a Vapour barrier on the “Warm” (internal) side - seal with Novia tapes for best results. Supplied unfolded, in rolls Breathable membrane with maximum waterproofing properties Low emissivity and high reflectivity 1.5m wide meets EN 13859-1 for pitched roofing and EN 13859-2 for walls meets class E EN 13501-1 fire classification Black side features overlap guide lines Suitable for zones 1-5 in the UK for BS 5534 wind uplift with tape Length: 50m Roll Thickness: 131gsm Width: 1.5m Coverage: 75m2 Resistance to Water Penetration: W1 Class Reaction to Fire: E Class Low Temperature Stability (no cracking at): -40°C to +80°C Emissivity: 0.18ε What is a Breather Membrane? Breather Membranes are designed to allow wall and roof structures to release excess moisture vapour into the atmosphere - to “breathe” - without allowing wind-driven rain and dust to penetrate wall or roof structures. They must be installed on the exterior (“cold”) side of any structure - beneath the main outer building lining, roof tiles or cladding. It is advised to seal your Breather Membrane with corresponding Lap Tapes for a quality, breathable seal. How do I Apply a Breather Membrane? A breather membrane should be applied on the exterior side of any wall or roofing structure - under the outer building lining, roof tiles or cladding. It should be fixed at intervals with suitable, permanent fixings and finished with Breather Membrane Lap Tape for the most reliable and air-tight finish. It is best used in conjunction with a Vapour Control Layer applied to the interior of the structure. For more information on use and specification, please download the data sheet for this product below. Data Sheets & Information Novia Reflex Reflective Breather Membrane Data Sheet

Product Details

Improve the R and u-value when used in suitable constructions with the Novia Reflex Reflective Roof & Wall Breather Membrane for use in pitched cold and warm roofs and insulated walls. A metallised polypropylene material allows this Roof and Wall Breather to help improve insulation performance in addition. Install directly over insulation, boarded roofs or rafters, or on the “Cold” (exterior) side of a structural frame or roof and pair with a Vapour barrier on the “Warm” (internal) side - seal with Novia tapes for best results. Supplied unfolded, in rolls Breathable membrane with maximum waterproofing properties Low emissivity and high reflectivity 1.5m wide meets EN 13859-1 for pitched roofing and EN 13859-2 for walls meets class E EN 13501-1 fire classification Black side features overlap guide lines Suitable for zones 1-5 in the UK for BS 5534 wind uplift with tape Length: 50m Roll Thickness: 131gsm Width: 1.5m Coverage: 75m2 Resistance to Water Penetration: W1 Class Reaction to Fire: E Class Low Temperature Stability (no cracking at): -40°C to +80°C Emissivity: 0.18ε What is a Breather Membrane? Breather Membranes are designed to allow wall and roof structures to release excess moisture vapour into the atmosphere - to “breathe” - without allowing wind-driven rain and dust to penetrate wall or roof structures. They must be installed on the exterior (“cold”) side of any structure - beneath the main outer building lining, roof tiles or cladding. It is advised to seal your Breather Membrane with corresponding Lap Tapes for a quality, breathable seal. How do I Apply a Breather Membrane? A breather membrane should be applied on the exterior side of any wall or roofing structure - under the outer building lining, roof tiles or cladding. It should be fixed at intervals with suitable, permanent fixings and finished with Breather Membrane Lap Tape for the most reliable and air-tight finish. It is best used in conjunction with a Vapour Control Layer applied to the interior of the structure. For more information on use and specification, please download the data sheet for this product below. Data Sheets & Information Novia Reflex Reflective Breather Membrane Data Sheet

Product Specification
Product Name Novia Reflex - Reflective Roof & Wall Breather 1.5m x 50m 75m2
Brand Novia

Popular products right now

Ad
Ad